How to Install on Steel

Step-by-Step Installation Process

1. Waterproof the Walls

• Self-adhesive sheets: Apply these to the steel walls to form a watertight barrier.
• Ensure full coverage: Avoid gaps or bubbles that could compromise the seal.

2. Seal the Wall Joints

• Waterproof tape: Use this to seal the joints between the adhesive sheets.
• Correct adhesive: Apply the adhesive thoroughly to ensure a secure, watertight bond.

3. Waterproof the Floor

• Self-adhesive sheets: Lay these sheets over the concrete slab at the bottom of the pool.
• Overlap for security: Ensure a 5 cm overlap between sheets to prevent leaks.
• Seal overlaps: Use the same adhesive from Step 2 to seal each overlap.

4. Seal the Wall-Floor Junction

• Waterproof tape: Apply the tape carefully along the junction where walls meet the floor.
• Adhesive seal: Use waterproof adhesive to secure the tape, ensuring no gaps.

5. Seal Pool Accessories

• Special putty: Seal off lights, impellers, and other pool accessories.
• Check for leaks: Ensure each sealed area is watertight before proceeding.

6. Install the Pool Tiles

• Adhesive selection: Use a manufacturer-recommended adhesive compatible with steel surfaces.
• Lay tiles: Carefully position your glass mosaic tiles and press them firmly into place.
• Grout application: Use the recommended epoxy grout for durability and water resistance.

Final Inspection

• Check thoroughly: Inspect all seals and tiles to ensure no weak points.
• Curing time: Allow 24-48 hours for adhesives and grout to set before filling the pool with water.

Why Choose Glass Mosaic Tiles for Steel Pools?

• Durability: Stronger than PVC liners, resistant to wear and chemical exposure.
• Aesthetic appeal: Elevates your pool’s design with luxurious finishes.
• Longevity: Proper installation ensures years of leak-free enjoyment.

By following these detailed steps, you’ll ensure a secure and stunning steel pool tile installation that combines durability with visual elegance.